Built for Contractors in the Field
Quick-access reference material for commercial restroom installation, inspection, and troubleshooting. From rough-in dimensions to ADA punch-list items — everything in one place without hunting through manufacturer sites.
Plumbing Rough-In Sheets
Standard supply and drain locations for floor-mount toilets, wall-hung toilets, urinals, lavatories, and flushometers. Use as a starting point before confirming with submittals.
View Rough-In Sheets →ADA Installation Heights
Mounting heights for grab bars, accessories, mirrors, dispensers, and hand dryers. Side reach and forward reach range 15"–48". Grab bars: 33"–36" AFF centerline.
View ADA Templates →Toilet Partition Installation Guide
Sequence for floor-anchored, ceiling-hung, and overhead-braced systems. Anchor bolt patterns, hardware installation order, ADA stall door swing clearance, and leveling procedure.
View Partition Guide →ADA Compliance Quick Reference
Field-ready ADA dimensions: toilet centerline (16"–18" from wall), grab bar heights (33"–36"), door maneuvering clearance (60" depth minimum), accessory reach ranges.
Full ADA Guide →Fixture Count Code Reference
IPC 2021 and UPC minimum fixture count tables by occupancy type. Know when an additional water closet is required and when urinals can substitute for WCs (up to 67%).
View Code Guide →OSHA Restroom Requirements
OSHA 29 CFR 1910.141 minimums for workplace restrooms including fixture counts by employee count, maintenance standards, and privacy requirements for multi-gender facilities.
View OSHA Guide →Budget Estimator
Rough order-of-magnitude fixture package pricing by project type (office, school, healthcare, restaurant) and quality tier. Helpful for preliminary bids and owner conversations.
Open Estimator →Punch List & Inspection Checklists
Pre-opening punch list covering all fixture functions, ADA spot-checks, accessory mounting heights, sealant, door hardware, and signage. Downloadable and printable.
View Checklists →Ask the AI Assistant
Quick answers to restroom installation questions — ADA clearances, product compatibility, code minimums, and specification questions. Powered by Claude AI.
Open AI Assistant →Install 2× solid blocking or a continuous 3/4" plywood backer at 30"–38" AFF behind all grab bar locations, even if grab bars are not in the current scope. Retrofitting backing after drywall costs 5–10× more than doing it during rough-in.