📁 About These CAD Resources
CAD blocks are generic reference geometry based on standard fixture envelope dimensions. Always supplement with manufacturer-specific drawings from the project's specified products. Updated 2026.
Plan and elevation view blocks sized to typical commercial fixture envelopes.
Floor-Mounted Toilet — Plan View
Standard elongated bowl, 18"×30" rough-in plan block. Includes accessible centerline at 16"–18" from side wall. Floor and wall carrier options.
View Toilet Guide →Wall-Hung Toilet — Plan + Elevation
Wall-mounted elongated bowl with carrier dimensions. Rim height 15"–19" AFF range shown. Includes clearance zone overlay.
View Toilet Guide →Floor-Mounted Urinal Block Set
Stall, wall-hung, and trough urinal plan blocks. Standard 12" on-center urinal screen spacing included. Flushometer rough-in shown.
View Urinal Guide →Lavatory / Sink Block Set
Wall-hung, countertop drop-in, and undermount sink plan views. Includes ADA knee clearance zone for accessible lavatories.
View Sink Guide →Overhead plan and elevation blocks for common restroom accessories and partition layouts.
Toilet Partition Layout Templates
Floor-anchored and ceiling-hung partition stall configurations. Includes ADA-compliant end stall and ambulatory stall layouts with door swings.
View Partition Guide →Grab Bar Block Set
Side wall and rear wall grab bar plan and elevation blocks per ADA Section 609. 42" side bar and 36" rear bar standard dimensions.
View Grab Bar Guide →Hand Dryer & Dispenser Elevation Blocks
Surface-mounted hand dryer and soap dispenser elevation blocks with ADA mounting height callouts. Includes rough-in dimensions.
View Hand Dryer Guide →Waste Receptacle & Baby Changing Blocks
Floor-mounted and surface-mounted waste receptacle footprints. Horizontal and vertical baby changing station outlines with clearance zones.
View Baby Changing Guide →Most major manufacturers provide free product-specific CAD and BIM files directly from their websites.